|
|
T-175 Sectional Door by Richard Wilcox
Sections:
Insulated sections fabricated
from prepainted, hot dip galvanized, steel sheet; with rigid polyurethane insulation core, CFC-1 1 free,
face sheet stucco embossed and rib reinforced.
Sections thermally broken, steel-polyurethane-steel
sandwich formed by continuous process.
Sections formed with ship lap joint. 16mm (16ga) galvanized
steel endcaps.
Face sheet thickness: 0.48mm (0.019")
Section thickness: 45mm (1 3/4")
Thermal values of sections:
RSI=2.84 (R=16.4);
USI=0.34 (U=0.06)
K=0.0154 (0.107
Reinforcement:
Continuous internal reinforcement for hardware mounting.
Weatherstripping:
Neoprene bulb weatherstrip with continuous retainer full width of bottom of door.
Two dual-finned
seals between sections.
Finish:
Two coat, baked-on paint system, primer and polyester
finish coat (White) (Brown).
Hardware:
Refer to hardware page. Click HERE to view clearance
charts and hardware specifications.
Design:
Door design to meet or exceed industry-standard
windload.
|
|
|
|
T-150 Sectional Door By Richard Wilcox
Sections:
Insulated sections fabricated from
prepainted, hot dip galvanized, steel sheet; with rigid polyurethane insulation core, CFC-1 1 free, face
sheet stucco embossed and rib reinforced.
Sections thermally broken, steel-polyurethane-steel
sandwich formed by continuous process.
Sections formed with ship lap joint. 16mm (16ga) galvanized
steel endcaps.
Face sheet thickness: 0.41mm (0.016")
Section thickness: 38mm (1 1/2")
Thermal values of sections:
RSI=2.51 (R=14.25);
USI=0.40 (U=0.07)
K=0.0151 (0.105)
Reinforcement:
Continuous internal reinforcement for hardware mounting.
Weatherstripping:
Neoprene bulb weatherstrip with retainer.
Finish:
Two coat, baked-on paint system,
primer and polyester finish coat (White) (Brown).
Design:
Door design to meet or exceed
industry-standard windload
|
|
|
|
Glazing:
Full vision glazing section with 12.7mm (l/2") thick insulating glass
or 3mm (1/8") clear float glass, finish white aluminum.
A-305 X 610mm (12" X 24") dual acrylic
thermal set in molded gasket.
B- 610 x 152mm (24" x 6") or CPL- 610 x 203mm (24" x 8") clear
float glass sealed unit set in molded frame
D-864 x 407mm (34" x 16") sealed glass unit set in
molded frame.
E-610 x 305mm (24" x 12") clear float glass sealed unit set in molded frame.
|
|
|
|
ALUMATITE SECTIONAL ALUMINUM DOORS MODELS A175A, A175W, A175T BY RICHARD WILCOX
Sections:
Section framing: 45mm (1 3/4") thick sections fabricated from 6063-T6 aluminum alloy extrusions, extrusion
thickness 1.83mm (0.075") thick, and 3.7mm (0.1.5") thick at hardware mounting locations.
Panelled
sections fabricated from 1.29mm (0.05") thick stucco embossed aluminum sheet.
End stiles: 86mm
(3 3/8") wide aluminum for single end roller brackets; 162mm (6 3/8") for double end roller brackets.
Centre stiles: 50mm (2") wide, aluminum.
Pair of meeting rails: 83mm (3 1/4") high, aluminum.
A175, A175A and A175T: Top rail of bottom section 86mm (3 3/8") high, aluminum.
A115A
and A175W: Bottom rail of bottom section 86mm (3 3/8") high, aluminum.
A175T: Bottom section (optional
top section) of 45mm (1 3/4") steel/polyurethane/steel sandwich panel, CFC-11 free, stucco embossed,
ribbed reinforced, colour white, thermal values of RSI=2.84 (R=16.4); USI=0.34 (U=0.061).
Reinforcement:
3.7mm (0.09") thick aluminum extrusion for hardware mounting.
Full width integral horizontal,
reinforcing truss at each pair of meeting rails. (minimum depth of 44.5mm (1 3/4")
Glazing:
Self-aligning glazing retainer.
3mm (1/8") 6mm (1/4") thickglass or acrylic glazingOR 12.7mm
(1/2") thick thermal glazing of two panes of glass.
Weatherstripping:
Neoprene bulb
weatherstrip for bottom of door continuously supported.
Dual between sections seals.
Finish:
A175A Clear anodizing to AA Spec A-21.
Al75W and A175T White Duracron Super 600 thermo-setting
acrylic enamel.
Design:
Door design to meet industry-standard windload.
|
|
|
